ND Yag Laser Interface Introduction
We offer 3 tips for ND yag laser.
532nm for color tattoo removal;
1064nm for dark tattoo removal;
1320nm for carbon peeling treatment, which also called Hollywood peeling, is a type of skin rejuvenation treatment that can get rid of the impurities from skin, has skin whitening function and can shrink skin pores.
Laser Tattoo Removal / Pigmentation Treatment by ND Yag Laser 532nm & 1064nm Tips
1. Clean the treatment area, disinfect utensil, and shave the treatment area if necessary. The area to be treated must be dry, as the treatment will be affected if there is water in the treatment area.
2. The operator should wear protective glasses. Keep the operation room clean and make sure illumination is bright enough. keep the temperature between 22 and 28°C.
3. The client’s eyes should be protected with thick medical cloth and eye coverings.
4. Choose Treatment Heads.
The laser has three inter-changeable treatment tips, each offering different wavelengths: 532nm, 1064nm and 1320nm, these screw into the end of the hand piece.
Please treat with 532nm head first when you treat lighter color like red. After 2-3 times treatment, the red color tattoo may possibly turn black or brown. Then treat it with 1064nm head.
Carbon Peeling (Hollywood Peeling) by ND Yag Laser 1320nm Tip
1320nm for carbon peeling treatment, which also called Hollywood peeling, is a type of skin rejuvenation treatment that can get rid of the impurities from skin, has skin whitening function and can shrink skin pores.
Carbon peeling steps:
– Apply carbon gels to client face and wait it gets dry. (1 face treatment need about 2ml carbon gel)
– Put 1320nm tip to handle and choose 1320nm from interface.
– Can directly use our pre-set parameters to do the treatment. (If you think speed is slow, you can also make frequecy to 10 Hz)
*Make sure patient and technician wear goggles to protect from light, and make sure not to make the laser point to any body’s eyes, even it is not in Standby status.
