Diode Laser Interface Introduction
Our software is very easy to use. Even starters can use it very easily. You only need to follow our system:
– to choose what gender and what skin tone you will do the treatment
– then choose hair thickness
– then choose treatment area
– then our system will lead you to our pre-set parameters, you can directly use this parameter for the treatment dear
* Besides, we also offer user manual and treatment parameters, and if you still not sure how do use the machine, you can also contact us for help any time.
- ①: Treatment energy
- ②: it is voltage or brightness of light, the higher it is, the higher energy is
- ③: pulse duration. it means the time that the light will stay in skin, for example, 125ms, measn light will stay in skin for 125ms. the higher it is, the higher energy is
- ④: frequency. it means in 1 second laser will shoot how many times, for example, here 2 means in every second laser gives 2 shots. if you want faster treatment, can make here faster
- ⑤: it is the timer. you can choose 1-30 seconds here. for example, if you put 10S here, it means you keep pressing the button in handle, then the laser will give shots for 10 seconds then stop. you will need to press button again to make it shot. it is designed to avoid laser give shots continually for too long time
- ⑥: cooling level, you can choose from 1-5. usually in treatment 2-4 level is good
Hair Removal Treatment by Diode Laser
– Shave hair and apply cooling gel in the treatment area.
– Follow our system to choose gender, skin type, hair thickness and treatment area. Then our system will directly offer a pre-set parameter, starters can directly use. Or, can follow our recommended parameters as well.
– For back, leg etc large area treatment, please choose big spot size. For lip, finger or beard line, eyebrow line, please choose small spot tip.
*Make sure patient and technician wear goggles to protect from light, and make sure not to make the laser point to any body’s eyes, even it is not in Standby status.
Two Ways for Skin Rejuvenation by Diode Laser
Method 1:
– Apply cooling gel in face.
– Choose proper parameter to do the treatment, with treatment head closely touching the skin.
Method 2:
– No need cooling gel
– Choose proper parameter to do the treatment, with treatment head about 15-20cm above the face.
*Make sure patient and technician wear goggles to protect from light, and make sure not to make the laser point to any body’s eyes, even it is not in Standby status.
